LVM Install a New Physical Volume

From UNIX Systems Administration
Revision as of 14:31, 4 January 2012 by Michael Kohler (talk | contribs)
Jump to navigation Jump to search

Installation of a New Physical Volume

  1. # diag
  2. Select: Task Selection
  3. Select: Hot Plug Task
  4. Select: SCSI and SCSI Raid Hot Plug Manager
  5. Select: Attach a Device Attached to an SCSI Hot Swap Enclosure Device
  6. Select: Slot # of the physical volume you wish to remove.
  7. Follow the on-screen instructions to install the new physical volume.

Further Reading

  1. IBM pSeries and AIX Information Center
Retrieved from "http://www.outlandsmud.com/wiki/index.php?title=LVM_Install_a_New_Physical_Volume&oldid=132"