LACP (802.3ad) Configuration & Verification: Difference between revisions
Jump to navigation
Jump to search
| Line 2: | Line 2: | ||
== Configuration == | == Configuration == | ||
# Use the smitty fastpath etherchannel to enter the menu. | # Use the smitty fastpath etherchannel to enter the menu. | ||
# | #: <tt>'''# smitty etherchannel'''</tt> | ||
# Select: <tt>'''Add an EtherChannel / Link Aggregation'''</tt> | ## Select: <tt>'''Add an EtherChannel / Link Aggregation'''</tt> | ||
# Select the primary ethernet adapters that will be a part of the etherchannel configuration and press <tt>'''[Enter]'''</tt> | ## Select the primary ethernet adapters that will be a part of the etherchannel configuration and press <tt>'''[Enter]'''</tt> | ||
== Verification == | == Verification == | ||
Revision as of 21:05, 13 December 2017
Configuration
- Use the smitty fastpath etherchannel to enter the menu.
- # smitty etherchannel
- Select: Add an EtherChannel / Link Aggregation
- Select the primary ethernet adapters that will be a part of the etherchannel configuration and press [Enter]
Verification
Verify LACP activity
- Verify LACP adapter activity is Active, Backup, or down.
- # entstat -d <etherchannel interface> | egrep 'ETH|Active|Backup'
List etherchannel devices
- List all adapters.
- # lsdev -Cc adapter
- The device configured for 802.3ad will have output similar to the following.
ent8 Available EtherChannel / IEEE 802.3ad Link Aggregation