LACP (802.3ad) Configuration & Verification: Difference between revisions
Jump to navigation
Jump to search
Line 9: | Line 9: | ||
=== Verify LACP activity === | === Verify LACP activity === | ||
# Verify LACP adapter activity is Active, Backup, or down. | # Verify LACP adapter activity is Active, Backup, or down. | ||
# | #: <tt>'''# entstat -d <etherchannel interface> | egrep 'ETH|Active|Backup''''</tt> | ||
=== List etherchannel devices === | === List etherchannel devices === | ||
# List all adapters. | # List all adapters. | ||
# | #: <tt>'''# lsdev -Cc adapter'''</tt> | ||
# The device configured for 802.3ad will have output similar to the following. | # The device configured for 802.3ad will have output similar to the following. | ||
<pre style="width: 700px"> | <pre style="width: 700px"> |
Latest revision as of 21:06, 13 December 2017
Configuration
- Use the smitty fastpath etherchannel to enter the menu.
- # smitty etherchannel
- Select: Add an EtherChannel / Link Aggregation
- Select the primary ethernet adapters that will be a part of the etherchannel configuration and press [Enter]
Verification
Verify LACP activity
- Verify LACP adapter activity is Active, Backup, or down.
- # entstat -d <etherchannel interface> | egrep 'ETH|Active|Backup'
List etherchannel devices
- List all adapters.
- # lsdev -Cc adapter
- The device configured for 802.3ad will have output similar to the following.
ent8 Available EtherChannel / IEEE 802.3ad Link Aggregation