LACP (802.3ad) Configuration & Verification

From UNIX Systems Administration
Revision as of 18:48, 3 February 2015 by Michael Kohler (talk | contribs)
Jump to navigation Jump to search

Configuration

Verification

Verify LACP activity

  1. Verify LACP adapter activity is Active, Backup, or down.
    1. # entstat -d <etherchannel interface> | egrep 'ETH|Active|Backup'

List etherchannel devices

  1. List all adapters.
    1. # lsdev -Cc adapter
  2. The device configured for 802.3ad will have output similar to the following.
         ent8    Available       EtherChannel / IEEE 802.3ad Link Aggregation


Further Reading

Retrieved from "http://www.outlandsmud.com/wiki/index.php?title=LACP_(802.3ad)_Configuration_%26_Verification&oldid=623"