LACP (802.3ad) Configuration & Verification
Jump to navigation
Jump to search
pre { width: 100px }
Configuration
Verification
Verify LACP activity
- Verify LACP adapter activity is Active, Backup, or down.
- # entstat -d <etherchannel interface> | egrep 'ETH|Active|Backup'
List etherchannel devices
- List all adapters.
- # lsdev -Cc adapter
- The device configured for 802.3ad will have output similar to the following.
ent8 Available EtherChannel / IEEE 802.3ad Link Aggregation