HMC Initialize an LPAR

From UNIX Systems Administration
Jump to navigation Jump to search

Initialize a Full System LPAR

  1. Logon to the HMC as an administrator.
  2. Expand: Systems Management->Servers.
    Highlight the server.
    From the Tasks Panel Select: Properties.
    Ensure "Power off the system after all logical partitions are powered off" is not checked.
  3. From AIX shutdown the LPAR.
    # shutdown -h now
  4. Remove the LPAR from the HMC's NVRAM.
    Expand: Systems Management->Servers.
    Highlight the server.
    From the Tasks Panel Expand: Configuration->Manage Partition Data.
    Click: Initialize
    Confirm your choice.
  5. Recreating the LPAR.
    Expand: Systems Management->Servers.
    Highlight the server.
    From the Tasks Panel Expand: Configuration->Create Logical Partition.
    Click: AIX or Linux.
    Name the LPAR as the serial number of the system and the Profile as anything.
    Check: Use all the resources in the system.
    Click: Finish

Further Reading

  1. IBM pSeries and AIX Information Center
Retrieved from "http://www.outlandsmud.com/wiki/index.php?title=HMC_Initialize_an_LPAR&oldid=1428"