Network - Setup Teamed Interfaces: Difference between revisions
Jump to navigation
Jump to search
(Created page with "== RHEL 7+ == # Create the team interface #: <tt>'''# nmcli connection add type team con-name team0 ifname team0 team.runner <activebackup | lacp | loadbalance | roundrobin>''...") |
(No difference)
|
Revision as of 14:52, 9 April 2022
RHEL 7+
- Create the team interface
- # nmcli connection add type team con-name team0 ifname team0 team.runner <activebackup | lacp | loadbalance | roundrobin>
- Assign the port interfaces to the team.
- # nmcli connection add type ethernet slave-type team con-name team0-port0 ifname <interface1> master team0
- # nmcli connection add type ethernet slave-type team con-name team0-port1 ifname <interface2> master team0
- Statically assign network information
- # nmcli connection modify team0 ipv4.addresses <IP address>/<CIDR subnet mask>
- # nmcli connection modify team0 ipv4.gateway <gateway IP address>
- # nmcli connection modify team0 ipv4.dns <DNS IP address>
- # nmcli connection modify team0 ipv4.dns-search <search domain>
- # nmcli connection modify team0 ipv4.method manual
- # nmcli connection modify teamo connection.autoconnect yes