LVM Logical Volume Geometry Size Problem: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
Line 12: | Line 12: | ||
#: <tt>'''# vgchange -an <volume group>'''</tt> | #: <tt>'''# vgchange -an <volume group>'''</tt> | ||
# Rescan all SCSI Host Adapters. | # Rescan all SCSI Host Adapters. | ||
#: <tt>'''# echo '- - -' > /sys/class/scsi_host/< | #: <tt>'''# echo '- - -' > /sys/class/scsi_host/host<#>/scan'''</tt> | ||
# Rescan all SCSI block devices associated with the volume group | # Rescan all SCSI block devices associated with the volume group | ||
#: <tt>'''# echo 1 > /sys/block/<block device>/device/rescan'''</tt> | #: <tt>'''# echo 1 > /sys/block/<block device>/device/rescan'''</tt> |
Revision as of 03:00, 28 January 2022
Error Messages Observed
The following messages appear in dmesg after an unsuccessful activation of a volume groups logical volumes
- device-mapper: table: <major>:<minor>: <block device> too small for target: start=<sector>, len=<sector>, dev_size=<size>
- kernel: EXT4-fs (dm-9): bad geometry: block count <number> exceeds size of device (<number> blocks)
The following messages appear after a vgimport on a volume group
- device-mapper: resume ioctl on failed: Invalid argument
- Unable to resume <volume group>-<logical volume> (253:23)
Fix Procedure
- Deactivate the volume group's logical volumes
- # vgchange -an <volume group>
- Rescan all SCSI Host Adapters.
- # echo '- - -' > /sys/class/scsi_host/host<#>/scan
- Rescan all SCSI block devices associated with the volume group
- # echo 1 > /sys/block/<block device>/device/rescan
- Resize all physical volumes associated with the volume group
- # pvscan
- # pvresize /dev/<block device>
- Activate the volume group's logical volumes
- # vgchange -ay <volume group>